How To Set Time On Moultrie Camera

Moultrie A-Series Game Photographic camera

Thanks for your purchase of an A-Series Digital Game Camera. Please read this booklet before using the unit. If you should have whatsoever questions well-nigh this product or any other Moultrie product, please contact us using the information on the back of this booklet. Please annals your camera at www.moultriefeeders.com/warranty to activate your warranty.

Overview

QUICK START INSTRUCTIONS

Battery Installation
Open the camera cover and install 8 AA Alkaline metal or Lithium batteries. Make sure that the (+ and -) polarities lucifer the polarities indicated inside the battery sleeping room.
Notation: Anytime you lot load or unload batteries, make sure that the photographic camera is OFF. If using 12V DC Power Panel Plug, do not remove internal batteries.

Insert SD Bill of fare

You volition need to open the forepart encompass to insert an SD retention carte. You tin can insert a SD Card upward to 32 GB (not included). Insert the SD card in the direction indicated on the bill of fare, until you hear an aural click.
Note: Camera will not operate without an SD memory menu installed. Ultra/turbo SD cards are non recommended.

Power ON

Slide the Fashion Switch to the Setup position. The battery level will announced on the LCD Display. The camera has powered up.

Mounting with a Strap

Close cover and place camera on a tree or pole approximately 3 ft. high. Thread the mounting strap through the mounting strap slots on the back of the camera and secure.
Hint: If you lot are mounting photographic camera to cover a trail, confront the camera downward the trail tilted at a slight down bending.
Face the camera north or south to avoid over exposure from the lord's day.
Clear brush abroad from photographic camera front to avoid false triggers from the wind.

Photographic camera SETUP

Power ONSlide the ability switch to the ON position. The battery level will appear on the LCD Display for 2 seconds.After 2 seconds, the photographic camera will display the countdown. When the countdown timer reaches "00", the display will plough off and the camera will OK Capture Mode.If the camera detects that the bombardment level is 15% or below, the Low Battery screen will appear and the unit of measurement will turn off.

To begin modifying the camera settings, slide the switch to the SETUP position. The camera will display the currently set time. Use the Upwards and Downwards arrow keys to change the currently flashing option. Once setting is adjusted to the desired option, press OK to lock in the setting and move to the next field/selection.
Note: while in SETUP way, the move sensor will detect movement and illuminate the STATUS LED on the front of the photographic camera for ~i 2nd. You can use this feature to ensure camera is properly aimed to observe motility in the desired target expanse.

Setting Time and DateWhile the camera is in the Setup mode, the LCD brandish volition show the fourth dimension. Press the OK button and the option will wink. Utilise the UP/Downwards buttons to change the pick. Printing the OK button to lock in the selection and move to the next pick. Repeat the process to set the year, month and day. Detection Delay Setting
Detection Delay determines the number of minutes between pictures when an animate being is detected and remains in range. Press the OK button. Use the Up/Down buttons to choose between (0, 15, 30 sec, 1 or 5 min). Press OK to lock in your selection and motility to the side by side selection. Setting Capture Mode
Employ the Up/Downward buttons to choose between 5 unlike modes:
1 Photo/Low Resolution, 1 Photo/High Resolution, iii Photos/Depression Resolution, 3 Photos/High Resolution and Loftier/Low Video. Press OK to lock in your pick and motion to the next selection.
The on-screen icons for each mode are shown to the right:

Setting Photographic camera ID
Use the Up/Downwards buttons to choose between ix different numbers (1-nine) to help identify your cameras (i.east. "CAMERA iii" volition be marked on the info strip given 3 was selected).
Press OK to lock in your pick and motility to the next option.

Reset Picture Count/Erase Images/Format Card
You can reset the picture count on the photographic camera. Use the Up/Down buttons to choos betwixt Yes or No. Press the OK button to ostend the selection. "Yep" will reset file number to start from 0001 and erase all images stored on the SD card.

NOTE: This will also format your SD bill of fare for use in your photographic camera.

Of import Battery information

Only use Element of group i or Lithium batteries. We recommend the apply of Analeptic batteries.
Do not mix quondam and new batteries. Always replace ALL the batteries at the same fourth dimension.
When the photographic camera is not in utilize, please remove the batteries.

Moultrie Limited Warranty

This product has been thoroughly tested and inspected earlier shipment. It is guaranteed from defects in material and workmanship from the date of buy for 2 years. Under this limited guarantee we agree to replace or repair free of charge any part or parts which have been found to be lacking in original cloth or workmanship. Should you require in-warranty service, phone call our Customer Service Department. If your trouble cannot exist addressed over the telephone, we may demand you to ship us your defective product plus proof of purchase.
You must register your camera at world wide web.moultriefeeders.com/warranty to activate your two-year warranty.

Troubleshooting
Please visit world wide web.moultriefeeders.com/contact-united states of america for troubleshooting and helpful tips.

Returns and Repairs
Please visit http://www.moultriefeeders.com/return-policy and complete the form or our Service Department volition gladly answer whatever questions yous have. Call 800-653-3334, Mon – Friday, 8:00 AM to 5:00 PM CST.
MOULTRIE MOBILE® COMPATIBILITY
Your photographic camera is compatible with our Moultrie Mobile® cellular service when combined with the Field Modem MV1. Please visit www.moultriemobile.com for more information.

Note: changes and modiﬁcations not expressly canonical past the party responsible could void the user's authorization to operate this device.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following 2 conditions:
(1) This device may not cause harmful interference, and
(two) this device must accept whatsoever interference received, including interference that may cause undesired performance.

NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE Acquired Past UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER'South AUTHORITY TO OPERATE THE EQUIPMENT.

NOTE: This device complies with the limits for a Course B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection confronting harmful interference in a residential installation. This device generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may crusade harmful interference to radio communications. However, there is no guarantee that interference volition non occur in a detail installation. If this device does cause harmful interference to radio or idiot box reception, which can exist determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a excursion dissimilar from that to which the receiver is continued.
Consult the dealer or an experienced radio/Telly technician for help.

Ezoic